Are you one of those who dream of making their own wakeboard slider? Well, there is good news for you. You can make your own wakeboard slider. You just need some spare time to make it.

First, decide the size of your wakeboard slider. Some people prefer small size wakeboard slider, while some prefer long wakeboard slider. When you are not much experienced, it will be wise to make a small size wakeboard slider. A four feel long wakeboard slider is a good option.

You need the following material to make it.

• PVC internal unions
• Plastic drums
• Screws
• Plywood
• PVC cleaner
• PVC
• Cement
• Toggle bolts

First of all, build a frame for holding the drums. The material should be of 2X4s. Keep length and breadth 12 and 6 feet correspondingly.
Now, box the drums. All four corners should be prepared such that the barrel should not fit all through the way.
 
Now, it is time to add supports for the beam.
When you are done with it, attach angle braces to it. It will be useful to prevent risky right-left movements.
Mount it to the PVC. Next, join the two lengths. You can use scabs also.

Finally, attach the PVC. Use good quality toggles bolt.
Use them at a distance of four feet. The nuts should face the direction of the tubing runs lengthwise. Add the rear slider.

Now, put the front section to the rear. Leave no gaps.
Apply braces, throughout the arc.
Now, your slider is ready. All you need to do is, paint it.